Introducción
If your Sony SRS-X55 speaker won't play sound from the auxiliary jack, replacing the I/O board may resolve the problem.
Qué necesitas
-
-
Remove the six screw covers with a spudger.
-
Remove the six 11 mm Phillips screws from the bottom panel.
-
Remove the bottom panel of the speaker.
-
-
-
-
Remove the two Phillips screws from the I/O board.
-
Remove the front panel to the speaker by pushing on the two tabs in the corners.
-
-
-
Disconnect the ribbon cable from the I/O board.
-
Carefully remove the I/O board from the speaker.
Is the I/0 board available, mine is damaged and the took it to repair shop but they are saying it cant be repaired
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.
Equipo
University of Alabama, Team 1-3, Sydow campbell Spring 2016 Miembro de University of Alabama, Team 1-3, Sydow campbell Spring 2016
UA-SYDOW CAMPBELL-S16S1G3
5 Miembros
5 Guías creadas
Geez, they make it a 'challenge' to get those gaskets under the batt covers off.
Don't make ant immediate plans....call your wife, you're gonna be a little late.
Jim Malina - Contestar
I need battery with board please help ??
Kevin Ke - Contestar