Saltar al contenido principal

Sony SRS-X3 Battery Replacement

Qué necesitas

  1. Sony SRS-X3 Battery Replacement, Battery: paso 1, imagen 1 de 1
    • Remove the 6 philips head screws using the PH1 bit.

  2. Sony SRS-X3 Battery Replacement: paso 2, imagen 1 de 1
    • Remove the 3 philips head screws holding in the green circuit board

  3. Sony SRS-X3 Battery Replacement: paso 3, imagen 1 de 1
    • Unclip the battery pack and replace it with another one.

Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

2 comentarios

Can you give the battery # on this please

Dan Clark - Contestar

Good instructions. I had one problem when removing the green circuit card. The ribbon cable came out. On mine there was a small black retention bar that I flipped open to allow the ribbon cable to reinsert, then I returned the retention bar back down to secure the ribbon cable in place. It worked fine after that.

Harpo - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 19

Ultimos 30 días: 81

Todo El Tiempo: 6,656