Sony Reader Touch Edition PRS-600 Back Cover Replacement

Qué necesitas

Using the Phillips head screwdriver PH000, remove the two 1.4 mm screws that are located on the backside of the device.

Slide the back cover off by pushing it to the left, away from the side that held the screws.
Remove the cover.

This is what the device should look like once the back cover panel has been removed.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Miembro Desde 10/13/14

857 Reputación

7 Guías creadas

CLEM-BENSON-F14S1G4

4 Miembros

22 Guías creadas