Repara tus cosas Comunidad Tienda

Sony Mavica MVC-CD1000 LCD Screen Replacement

Introducción

If your camera is not properly displaying images on the screen and you’ve already replaced the batteries, the screen may be faulty. In addition, if there are dead pixels on your screen, you may need to replace the screen for your device. Refer to this guide if the camera’s LCD screen is not working or there is a problem with it.

Qué necesitas

  1. Sony Mavica MVC-CD1000 LCD Screen Replacement, LCD Screen: paso 1, imagen 1 de 2 Sony Mavica MVC-CD1000 LCD Screen Replacement, LCD Screen: paso 1, imagen 2 de 2

    • Gently open this panel using a plastic opening tool or your hands.

    Editar

  2. Sony Mavica MVC-CD1000 LCD Screen Replacement: paso 2, imagen 1 de 3 Sony Mavica MVC-CD1000 LCD Screen Replacement: paso 2, imagen 2 de 3 Sony Mavica MVC-CD1000 LCD Screen Replacement: paso 2, imagen 3 de 3

    • Use the suction cup to remove the cover and pull it out of the device.

    Editar

  4. Sony Mavica MVC-CD1000 LCD Screen Replacement: paso 3, imagen 1 de 3 Sony Mavica MVC-CD1000 LCD Screen Replacement: paso 3, imagen 2 de 3 Sony Mavica MVC-CD1000 LCD Screen Replacement: paso 3, imagen 3 de 3

    • Loosen and remove the screws using the screwdriver and locate the LCD board as shown in the photos.

    Editar

  5. Sony Mavica MVC-CD1000 LCD Screen Replacement: paso 4, imagen 1 de 3 Sony Mavica MVC-CD1000 LCD Screen Replacement: paso 4, imagen 2 de 3 Sony Mavica MVC-CD1000 LCD Screen Replacement: paso 4, imagen 3 de 3

    • Remove the motherboard by pulling up the panel and remove the LCD screen from the device.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 8

Todo El Tiempo: 286