Repara tus cosas Comunidad Tienda

Sony MDR-XB450AP Extra Bass Headphones Swivel Plastic Cover Replacement

Introducción

This guide will provide instruction for replacing the swivel plastic cover on the Sony Extra Bass headphones. This piece encases the swivel piece and can get damaged through wear and tear.

Qué necesitas

  1. Sony MDR-XB450AP Extra Bass Headphones Swivel Plastic Cover Replacement, Swivel: paso 1, imagen 1 de 1

    • Begin by laying the headphones down flat with the speakers facing up.

    • Be sure to unplug the headphones from any other devices.

    Editar

  2. Sony MDR-XB450AP Extra Bass Headphones Swivel Plastic Cover Replacement: paso 2, imagen 1 de 2 Sony MDR-XB450AP Extra Bass Headphones Swivel Plastic Cover Replacement: paso 2, imagen 2 de 2

    • Next, take out the screws that hold the front plate, using a J00 screwdriver.

    • Repeat for both the left and right screws.

    • These screws are very small. It is helpful to have a spot prepared to put the screws to avoid losing pieces.

    Editar

  3. Sony MDR-XB450AP Extra Bass Headphones Swivel Plastic Cover Replacement: paso 3, imagen 1 de 1

    • Now that the screws have been removed, pull away the plastic casing that covers the swivel piece (directly above the speaker).

    Editar

  5. Sony MDR-XB450AP Extra Bass Headphones Swivel Plastic Cover Replacement: paso 4, imagen 1 de 1

    • Now that the swivel piece is exposed, use a J00 screwdriver to unscrew the center screw.

    • Repeat this process on both sides if necessary.

    • This center screw is the piece that retains the swivel action, unscrew completely and remove to replace.

    Editar

  6. Sony MDR-XB450AP Extra Bass Headphones Swivel Plastic Cover Replacement, Swivel Plastic Cover: paso 5, imagen 1 de 1

    • With the swivel screw removed, remove the plastic casing.

    Editar

  7. Sony MDR-XB450AP Extra Bass Headphones Swivel Plastic Cover Replacement: paso 6, imagen 1 de 1

    • Using a little amount of force, slide the plastic cover off of the headband.

    Editar

  8. Sony MDR-XB450AP Extra Bass Headphones Swivel Plastic Cover Replacement: paso 7, imagen 1 de 1

    • Pull the plastic until the cover is fully removed.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Un comentario

Necesito la pieza, dónde la compro?

lucas2188 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 6

Todo El Tiempo: 3,220