Saltar al contenido principal

Introducción

This is a guide to show you how to replace the cushions on the Sony MDR-XB450AP headphones. Replace these if you are experiencing discomfort and/or if there is visible wear and tear to the cushions themselves.

Partes

No se especificaron partes.

  1. Begin by laying the headphones down flat on a surface.
    • Begin by laying the headphones down flat on a surface.

    • Make sure that the headphone speakers are facing upward.

    • Be sure to check that the headphones are not plugged into any devices.

  2. Kits de reparación de iPhone X

    ¿Garantía vencida? No te preocupes, tenemos la solución.

    Comprar Ahora

    Kits de reparación de iPhone X

    ¿Garantía vencida? No te preocupes, tenemos la solución.

    Comprar Ahora
  3. Using the plastic opening tools, gently pry the speaker from the headphone's base.
    • Using the plastic opening tools, gently pry the speaker from the headphone's base.

    • There will be some tearing involved, but this is necessary to remove the original cushion.

    • The cushion is bonded to the headphones with a circular adhesive strip. If you plan on reusing the cushion, try to keep the adhesive attached to the cushion during removal. This way the cushion can be easily re-attached to the headphones after repair.

Conclusión

To reassemble your device, follow these instructions in reverse order.

7 personas más completaron esta guía.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 16

Últimos 30 Días: 128

Todo El Tiempo: 2,766