Saltar al contenido principal

Sony ICF-C1T Screen Replacement

Qué necesitas

  1. Sony ICF-C1T Screen Replacement, Screen: paso 1, imagen 1 de 1
    • Make sure the clock is unplugged from the wall and the replacement battery has been taken out of the clock to prevent harm to you and to the clock.

    • Use a Phillips 00 head screwdriver to remove the four 14 mm screws from the bottom of the clock.

  2. Sony ICF-C1T Screen Replacement: paso 2, imagen 1 de 1
    • Insert the plastic opening tool to pry apart the top and sides of the device gently.

  3. Sony ICF-C1T Screen Replacement: paso 3, imagen 1 de 2 Sony ICF-C1T Screen Replacement: paso 3, imagen 2 de 2
    • Carefully pull the top of clock off as the clock display is located directly behind the face plate and is still connected by multiple wires.

    • Pull the top of the device away from the rest of the clock to expose the inside.

  4. Sony ICF-C1T Screen Replacement: paso 4, imagen 1 de 2 Sony ICF-C1T Screen Replacement: paso 4, imagen 2 de 2
    • Do not use too much pressure on the plastic to not break it.

    • Add pressure to the inside of the screen so that a small area is loosened enough to be able to use an opening tool.

    • Use the plastic opening tool to separate the screen from the device.

  5. Sony ICF-C1T Screen Replacement: paso 5, imagen 1 de 2 Sony ICF-C1T Screen Replacement: paso 5, imagen 2 de 2
    • Apply a tinted spray to dim the brightness once the tinted sheet is out of the way.

    • Another way to solve the brightness problem is to apply a tinted color sheet protector.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 10

Ultimos 30 días: 32

Todo El Tiempo: 4,508