Introducción
In this guide, you will learn how to remove the shutter assembly from the Sony Handycam HDR-CX675. Completely removing the shutter assembly must be done with caution, as it is connected to the motherboard with sensitive electrical ribbon.
Qué necesitas
-
-
-
Place the camera on its lens and keep the LCD screen open and pointed to your right.
-
Remove the 5.5mm JIS #00 screws from the hinge of the camera.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.