Introducción

In order to keep your device in working order, the tape transport unit may need to be replaced.

Partes

No se requieren partes.

Remove the eight (8) Phillips #00 screws. There are six (6) screws on the bottom of the camera and two (2) screws beneath the back light button.
  • Remove the eight (8) Phillips #00 screws. There are six (6) screws on the bottom of the camera and two (2) screws beneath the back light button.

Agregar Comentario

Remove the five (5) Phillips #00 cassette side screws.
  • Remove the five (5) Phillips #00 cassette side screws.

Agregar Comentario

  • Remove the three (3) Phillips #00 screws located on the top of the lens side cover.

Agregar Comentario

  • Remove the Phillips #00 screw holding the microphone on.

Agregar Comentario

  • Remove the two (2) Phillips #00 screws from lens side cover.

Agregar Comentario

  • Slide the lens side cover away from camera.

Agregar Comentario

  • Remove the Phillips #00 screw from the tape transport slider.

Agregar Comentario

  • Remove the four (4) Phillips #00 screws located on the top of the camera.

Agregar Comentario

  • Remove the electrical connector from camera.

Agregar Comentario

  • The tape transport unit is now free from the camera.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Emma

Miembro Desde 06/10/11

47 Reputación

4 Guías creadas

Equipo

UW Stout, Team 1-4, Zhou Fall 2011 Miembro de UW Stout, Team 1-4, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G4

5 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 5

Últimos 30 Días: 17

Todo El Tiempo: 2,291