Saltar al contenido principal

Sony HDR-AS30V Outer Casing Replacement

Qué necesitas

  1. Sony HDR-AS30V Outer Casing Replacement, Outer Casing: paso 1, imagen 1 de 1
    • Power off the device. Remove the component jack cover.

    • Open component door.

    • Using the Phillips 00 screwdriver, remove the two screws holding the jack cover in place.

  2. Sony HDR-AS30V Outer Casing Replacement: paso 2, imagen 1 de 1
    • Open the battery door.

    • Slide the battery cap along the length of the camera, then flip the cap outward. Use caution; there may be internal damage affecting the functionality of the sliding mechanism.

  3. Sony HDR-AS30V Outer Casing Replacement: paso 3, imagen 1 de 1
    • Prepare to remove outer casing.

    • Using the 2.5 mm precision slotted screwdriver, insert the tip of the screwdriver under the holder to wedge. Use caution when preparing to wedge apart fragile components.

  4. Sony HDR-AS30V Outer Casing Replacement: paso 4, imagen 1 de 1
    • Separate Casing from Device.

    • With the screwdriver wedged, apply slight force while pulling the casing away from the device. Use caution to avoid causing damage to fragile parts.

  5. Sony HDR-AS30V Outer Casing Replacement: paso 5, imagen 1 de 1
    • With the outer casing pulled away from the device, take note of the orientation of the inner component to avoid an electrical short.

    • Once the orientation of the inner component is noted, slide the inner component out of the casing. You may now replace the broken casing with a new one.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Patrick Finney

Miembro Desde 01/27/15

101 Reputación

1 Guía escrita

Equipo

Penn State, Team 2-12, Kaschak Winter 2015 Miembro de Penn State, Team 2-12, Kaschak Winter 2015

PSU-KASCHAK-W15S2G12

4 Miembros

4 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 830