Introducción

This guide will show you how to remove the Dark Grey case that allows you access to the Screens.

Partes

No se requieren partes.

  1. To remove the front cover, lift up the case with a fingernail in the small slot as shown.
    • To remove the front cover, lift up the case with a fingernail in the small slot as shown.

    Agregar Comentario

  2. To remove the front grey case, remove the two screws shown with a T5 Torx Screwdriver.
    • To remove the front grey case, remove the two screws shown with a T5 Torx Screwdriver.

    Agregar Comentario

    • Pry up the dark grey case with your fingernail until all four snaps around the top are loose.

    Agregar Comentario

    • Lift up towards the bottom and slide the case off.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Alex Serventi

Miembro Desde 07/10/10

50 Reputación

13 Guías creadas

Equipo

Cal Poly, Team 5-15, Maness Fall 2010 Miembro de Cal Poly, Team 5-15, Maness Fall 2010

CPSU-MANESS-F10S5G15

4 Miembros

26 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 3

Todo El Tiempo: 1,029