Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
The Logic Board is the part that the keys hit and translates the signals to the phone.
Qué necesitas
-
-
Remove the back cover by pulling it down, and then take out the battery.
-
Using a T6 Torx screwdriver, remove the 4 screws.
-
Keep the phone open with the back cover facing you.
-
-
-
-
Use the i Pod opening tool to remove the 2 ribbon wires (boxed in the photo) from the logic board.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.