Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Sony Ericsson Z500a Keypad Replacement

Qué necesitas

  1. Sony Ericsson Z500a Keypad Replacement, Keypad: paso 1, imagen 1 de 3 Sony Ericsson Z500a Keypad Replacement, Keypad: paso 1, imagen 2 de 3 Sony Ericsson Z500a Keypad Replacement, Keypad: paso 1, imagen 3 de 3
    • Remove the back cover and the battery.

  2. Sony Ericsson Z500a Keypad Replacement: paso 2, imagen 1 de 1
    • Remove the 4 screws using a T6 precision screwdriver.

    • Flip open the phone, and keep the back cover facing you.

  3. Sony Ericsson Z500a Keypad Replacement: paso 3, imagen 1 de 2 Sony Ericsson Z500a Keypad Replacement: paso 3, imagen 2 de 2
    • Take the plastic opening tool and run it between the phone case and phone body to loosen the key pad while the phone is open.

    • There are 2 clamps that lock it to the phone case (1 on each side).

  4. Sony Ericsson Z500a Keypad Replacement: paso 4, imagen 1 de 1
    • Flip the phone over and lift straight up on the key pad to remove it.

    • Be sure to hold the phone flat (parallel to the table), because there are loose parts that may fall out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Jory Benitez

Miembro Desde 04/16/10

1 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 7-12, Maness Spring 2010 Miembro de Cal Poly, Team 7-12, Maness Spring 2010

CPSU-MANESS-S10S7G12

4 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 2,721