Introducción
Use this guide to replace a defective Logic Board.
Qué necesitas
Resumen del Video
-
-
Use a Plastic Pry or other plastic tool to unhook the back housing / bezel and remove it.
-
Tip - try prying it open from the top and over to the side. It can be very tight if you are doing this for the first time. The volume rocker and camera button are not part of the housing, so try going around it.
-
-
Casi Terminas!
To reassemble your device, follow these instructions in reverse order.
Conclusión
To reassemble your device, follow these instructions in reverse order.
Equipo
