Introducción

A guide on how to replace the glass on a Sony Xperia Play.

Remove the 6 silver torx screws marked in red
  • Remove the 6 silver torx screws marked in red

Agregar Comentario

Remove the 7 black torx screws marked in yellow.
  • Remove the 7 black torx screws marked in yellow.

Agregar Comentario

  • Using a plastic prying tool, go around the outside of the phone releasing the plastic clips.

Agregar Comentario

  • Remove the plastic housing revealing the motherboard

  • Remove the two Phillips screws.

Agregar Comentario

  • Remove the headphone jack by carefully moving the dark plastic clip on the connector to 90 degrees

Agregar Comentario

  • Slide the phone to the open position

Agregar Comentario

  • Remove the display connector marked in orange using a plastic spudger to pry it upwards

  • Remove the connector for the front buttons by prising the retaining clip to 90 degrees

Agregar Comentario

  • Remove motherboard

Agregar Comentario

  • Remove the buttons from the phone

Agregar Comentario

  • Remove the three Phillips screws.

Agregar Comentario

  • Slide the metal frame across revealing the last screw . Make sure to keep the plastic cover after removing the screw

  • Disconnect the digitizer cable

Agregar Comentario

  • Insert a plastic spudger around the edge of the frame and take the lcd assembely from the glass

  • Using a heat gun heat around the edges of the glass to soften the glue, and use your prying tool between the glass and the frame to take the glass off.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

16 personas más completaron esta guía.

Kris James

Miembro Desde 27/01/12

594 Reputación

1 Guía escrita

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 9

Últimos 30 Días: 29

Todo El Tiempo: 29,849