Introducción

This guide provides instruction for installing a motherboard for the Sony Ericsson TM506 cell phone.

Partes

No se requieren partes.

  1. Firmly hold the phone between your fingers with your thumb on the battery cover. Push down with your thumb until the battery cover comes off. Push down with your thumb until the battery cover comes off.
    • Firmly hold the phone between your fingers with your thumb on the battery cover.

    • Push down with your thumb until the battery cover comes off.

  2. Unscrew the bottom two 5.4mm screws with a Torx T6 screwdriver. Unscrew the bottom two 5.4mm screws with a Torx T6 screwdriver. Unscrew the bottom two 5.4mm screws with a Torx T6 screwdriver.
    • Unscrew the bottom two 5.4mm screws with a Torx T6 screwdriver.

  3. Remove the two rubber casings for the top two screws with a plastic opening tool. Remove the two rubber casings for the top two screws with a plastic opening tool.
    • Remove the two rubber casings for the top two screws with a plastic opening tool.

  4. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda

    ¿Alguna vez arreglaste algo? Eso es genial.

    Comparte tu historia de reparación con #SoyUnGenio

    Todos somos Genios

    Comparte tu historia de reparación con #SoyUnGenio

  5. Unscrew these two 5.4mm screws with a Torx T6 screwdriver.
    • Unscrew these two 5.4mm screws with a Torx T6 screwdriver.

  6. There are eight snap hooks located around the outer case. Carefully snap these to remove the outer case. There are eight snap hooks located around the outer case. Carefully snap these to remove the outer case. There are eight snap hooks located around the outer case. Carefully snap these to remove the outer case.
    • There are eight snap hooks located around the outer case. Carefully snap these to remove the outer case.

  7. The sound box is attached to the case by two snap hooks. Lift the sound box up to remove it from the case. Lift the sound box up to remove it from the case.
    • The sound box is attached to the case by two snap hooks.

    • Lift the sound box up to remove it from the case.

  8. Locate the 80-pin connector. Carefully, lift up on the connector to separate it from the board.
    • Locate the 80-pin connector.

    • Carefully, lift up on the connector to separate it from the board.

  9. There are two snap hooks that attach the motherboard to the case. Using a plastic opening tool, carefully lift up on the motherboard to detach it. The motherboard is extremely fragile. Try to be forceful yet delicate in the removal because it will not come off easily.
    • There are two snap hooks that attach the motherboard to the case.

    • Using a plastic opening tool, carefully lift up on the motherboard to detach it.

    • The motherboard is extremely fragile. Try to be forceful yet delicate in the removal because it will not come off easily.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Daniel

Miembro Desde 20/06/12

71 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 1-1, Regan SU 2012 Miembro de Cal Poly, Team 1-1, Regan SU 2012

CPSU-REGAN-SU12S1G1

2 Miembros

16 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 992