Introducción

This guide provides instruction for installing a back case for the Sony Ericsson TM506 cell phone.

Partes

No se requieren partes.

Firmly hold the phone between your fingers with your thumb on the battery cover.
  • Firmly hold the phone between your fingers with your thumb on the battery cover.

  • Push down with your thumb until the battery cover comes off.

Agregar Comentario

Unscrew the bottom two 5.4mm screws with a Torx T6 screwdriver.
  • Unscrew the bottom two 5.4mm screws with a Torx T6 screwdriver.

Agregar Comentario

  • Remove the two rubber casings for the top two screws with a plastic opening tool.

Agregar Comentario

  • Unscrew these two 5.4mm screws with a Torx T6 screwdriver.

Agregar Comentario

  • There are eight snap hooks located around the outer case. Carefully snap these to remove the outer case.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Minnal

Miembro Desde 09/07/12

16 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 1-1, Regan SU 2012 Miembro de Cal Poly, Team 1-1, Regan SU 2012

CPSU-REGAN-SU12S1G1

2 Miembros

16 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 434