Remove battery cover
  • Remove battery cover

    • Press down firmly with thumb and slide cover back

Agregar Comentario

Remove 4 screws from battery chamber
  • Remove 4 screws from battery chamber

    • Red - Phillips 0 screwdriver

    • Blue - Torx 6 screwdriver

Agregar Comentario

  • Gently pry off back casing

    • Note: work shim or flathead screwdriver around entire seam before attempting to pull off casing. This will reduce the chance of cracking the casing.

Agregar Comentario

  • Remove casing to expose camera components

Agregar Comentario

  • Gently pry open front casing by working a small shim or flathead screwdriver along the entire seam

Agregar Comentario

  • Remove front casing by gently lifting it from the phone

    • Be careful not to pull off any other delicate pieces

Agregar Comentario

  • Keypad should be easy to remove

    • Caution: LCD screen is very fragile. Be careful not to catch the keypad on it while removing.

Agregar Comentario

  • Remove screws holding the screen in place

Agregar Comentario

  • Gently lift the base of the keypad to remove it

Agregar Comentario

  • Gently pull up the green film.

    • Avoid the joystick

    • The LCD screen will be attached to this film and come off with it.

  • Caution: LCD screen is very fragile. Handle with care.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Abby Evers

Miembro Desde 04/10/11

196 Reputación

12 Guías creadas

Equipo

UW Stout, Team 1-6, Zhou Fall 2011 Miembro de UW Stout, Team 1-6, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G6

4 Miembros

12 Guías creadas

Works perfectly, thank you guys!

Aurelien - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 3

Últimos 30 Días: 9

Todo El Tiempo: 3,498