Sony DCR-DVD 108 DVD Laser Replacement

Introducción

The laser is what reads the data from a DVD. It is a small and fragile component which may become misaligned, or dirty; cleaning before full replacement is advised.

Qué necesitas

Paso 1 DVD Laser

Sony DCR-DVD 108 DVD Laser Replacement, DVD Laser: paso 1, imagen 1 de 1

Open the DVD reader and remove the 4.3mm Phillips screw.

Editar

Paso 2

Remove black shield with a plastic spudger.

Editar

Paso 3

Remove the two 2.8mm Phillips screws pictured.

Editar

Paso 4

Next remove the underlying silver colored shield with a plastic spudger.

Editar

Paso 5

Herramienta utilizada en este paso:

Tweezers

$4.99

Comprar

With tweezers, gently remove the DVD laser, and expose solder leads.

Editar

Paso 6

With a solder iron, remove solder leads.
If you need assistance with soldering this guide may help:Cómo soldar y desoldar conexiones

Editar

Paso 7

Once solder leads are removed, and solder iron has been safely put away, you my know handle and replace DVD laser. Full replacement follows the steps provided in reverse.

Editar