Introducción

Disassembling the back cover of the camera so that we can repair components from the inside.

Partes

No se requieren partes.

Slide the battery cover in the direction the arrow points.
  • Slide the battery cover in the direction the arrow points.

  • Pull the battery cover towards you.

Agregar Comentario

Flick the blue switch for the battery to pop out.
  • Flick the blue switch for the battery to pop out.

  • Remove the battery from the camera.

Agregar Comentario

  • Using the Phillips #00 Screwdriver, remove the two screws from the caution panel.

  • Remove that panel.

  • Careful for falling pieces.

Agregar Comentario

  • Remove the screw with a Phillips #00 Screwdriver from the right side of the camera (with '3x optical zoom' engraved on the side panel).

  • Remove that panel.

Agregar Comentario

  • Remove the screw using the Phillips #00 Screwdriver from the bottom the camera, closest to the back cover.

Agregar Comentario

  • Gently remove the back cover.

  • It may be a bit stiff, so use some force to remove it. Proceed with caution.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

kkfong91

Miembro Desde 11/10/10

293 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 9-20, Regan Fall 2010 Miembro de Cal Poly, Team 9-20, Regan Fall 2010

CPSU-REGAN-F10S9G20

5 Miembros

9 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 3

Últimos 30 Días: 7

Todo El Tiempo: 3,248