Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
Make sure you have all of the requisite tools on hand before beginning to replace the flash bulb and its casing.
Qué necesitas
-
-
Find the hatch labeled "open" on the left side of the bottom of the camera.
-
Slide the hatch in the direction that the arrow is pointing. The hatch will open outward on its own.
-
-
-
Replace hatch and rotate camera 180 degrees. You should still be looking at the bottom of the camera.
-
Remove the four 2.5mm Phillips #0 screws.
-
-
-
-
Gently pull the LCD and its casing away from the motherboard as shown.
-
-
-
Turn the camera so the back is facing you.
-
Remove the 2.5mm Philips #0 screw at the top of the camera.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.