Introducción

This guide will teach the user how to disassemble and access the CCD module for replacement or installation.

The battery cover is located on the right side of the camera.
  • The battery cover is located on the right side of the camera.

  • Slide the cover to expose the battery.

Agregar Comentario

Ensure that the battery lines up properly with the slot in the camera.
  • Ensure that the battery lines up properly with the slot in the camera.

  • Slide battery in.

  • Slide cover closed.

  • Battery not shown

Agregar Comentario

  • Remove screws from outside of camera. There are 6 screws total.

  • 3 screws on underside.

  • 1 screw on right side, near battery cover.

  • 2 screws on left side.

Agregar Comentario

  • Use screwdriver to remove screws.

Agregar Comentario

  • Gently pull the front cover off of the main camera.

  • All of the inner parts of the camera are attached to the back screen.

Agregar Comentario

  • The front cover is now removed from the camera and the internal hardware is now exposed.

Agregar Comentario

  • This is the CCD module.

Agregar Comentario

  • Use plastic opening tool pop open the two ribbons attaching to the CCD module.

  • These are the two ribbons.

Agregar Comentario

  • Remove CCD module.

    • You may have to tug on the ribbons to remove the CCD module.

Agregar Comentario

  • The CCD module is now removed from the camera.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Stephannie Allen

Miembro Desde 11/03/13

189 Reputación

10 Guías creadas

Equipo

Clemson, Team 13-1, Benson Spring 2013 Miembro de Clemson, Team 13-1, Benson Spring 2013

CLEM-BENSON-S13S13G1

4 Miembros

10 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 511