1. First locate the appropriate screws for detachment.
    • First locate the appropriate screws for detachment.

  2. Remove the five screws shown using a Phillips #00 Screwdriver.
    • Remove the five screws shown using a Phillips #00 Screwdriver.

    • It is important to put the small screws in a safe location in order to reassemble the casing.

    • Using a spudger, carefully pry open the front casing.

    • Carefully separate the front casing from the camera body.

    • CAUTION: Be careful not to break the wire connecting the front casing and the camera.

    • It is necessary to first locate the appropriate screws in order to disassemble the back casing.

    • Remove the found screws with a small screwdriver.

    • It is important to put the small screws in a safe location in order to reassemble the casing.

    • Carefully pull the back casing away from the camera.

    • The back casing is now removed from the camera.

    • Remove the two screws on the back side of the camera surrounding the LCD screen.

    • Remove the two ribbon traces found on the left side of the lens on the front of camera holding the lens in place.

    • Carefully pull the lens away front the camera until it is released.

    • The lens is now successfully removed from the camera.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Katie McCraw

Miembro Desde 09/03/12

191 Reputación

7 Guías creadas

Equipo

Clemson, Team 1-5, Benson Spring 2012 Miembro de Clemson, Team 1-5, Benson Spring 2012

CLEM-BENSON-S12S1G5

4 Miembros

7 Guías creadas

Is there a way to disassemble the lens to correct the alignment. My daughter dropped it and I think the mechanism has been misaligned.

Macjune Tolentino - Contestar

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 5

Todo El Tiempo: 2,239