Saltar al contenido principal

Introducción

This guide shows a step by step process on how to replace the rear case of the camera. You must be careful during this guide due to certain parts being very vulnerable to breaking. If the case isn't staying in position or the buttons are unresponsive take a look at our troubleshooting guide for more help.

Partes

No se especificaron partes.

  1. Remove the 6mm Phillips #000 screws. Remove the 6mm Phillips #000 screws. Remove the 6mm Phillips #000 screws.
    • Remove the 6mm Phillips #000 screws.

  2. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  3. Remove the five 6mm Phillips #000 screws. Remove the four 3mm Phillips #000 screws. Remove the four 3mm Phillips #000 screws.
    • Remove the five 6mm Phillips #000 screws.

    • Remove the four 3mm Phillips #000 screws.

  4. Use the flat end of a  plastic spudger to pry apart the rear cover from the body of the camera.
    • Use the flat end of a plastic spudger to pry apart the rear cover from the body of the camera.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

USF Tampa, Team S1-G6, Nance Spring 2018 Miembro de USF Tampa, Team S1-G6, Nance Spring 2018

USFT-NANCE-S18S1G6

3 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 10

Últimos 30 Días: 28

Todo El Tiempo: 303