Saltar al contenido principal

Introducción

In order to reach the flash capacitor, you have to remove the front and back panel, the button board and the top cover of the device. Be very careful when you remove these parts.

Partes

No se especificaron partes.

  1. Sony Cyber-Shot DSC-W830 Flash Capacitor Replacement, Battery: paso 1, imagen 1 de 1
    • Slide the lock at the bottom of the camera to "Open".

    • The door to the battery pack is spring loaded.

  2. Sony Cyber-Shot DSC-W830 Flash Capacitor Replacement: paso 2, imagen 1 de 1
    • Slide the blue clip up and away from the battery.

  3. Sony Cyber-Shot DSC-W830 Flash Capacitor Replacement: paso 3, imagen 1 de 1
    • Remove the battery.

  4. Sony Cyber-Shot DSC-W830 Flash Capacitor Replacement, Front and Back Panel: paso 4, imagen 1 de 3 Sony Cyber-Shot DSC-W830 Flash Capacitor Replacement, Front and Back Panel: paso 4, imagen 2 de 3 Sony Cyber-Shot DSC-W830 Flash Capacitor Replacement, Front and Back Panel: paso 4, imagen 3 de 3
    • Remove the six 3.5mm Phillips #000 screws.

    • Rotate the lock away from the camera.

  5. Sony Cyber-Shot DSC-W830 Flash Capacitor Replacement: paso 5, imagen 1 de 3 Sony Cyber-Shot DSC-W830 Flash Capacitor Replacement: paso 5, imagen 2 de 3 Sony Cyber-Shot DSC-W830 Flash Capacitor Replacement: paso 5, imagen 3 de 3
    • Pry the device open with the plastic opening tool.

    • There are two clips that help prevent the front panel from separating.

  6. Sony Cyber-Shot DSC-W830 Flash Capacitor Replacement: paso 6, imagen 1 de 3 Sony Cyber-Shot DSC-W830 Flash Capacitor Replacement: paso 6, imagen 2 de 3 Sony Cyber-Shot DSC-W830 Flash Capacitor Replacement: paso 6, imagen 3 de 3
    • Remove the two plastic spacers between the front and the back panels.

    • The spacers may fall out when removing the panels.

    • Carefully remove the back panel.

  7. Sony Cyber-Shot DSC-W830 Flash Capacitor Replacement, Button Board: paso 7, imagen 1 de 2 Sony Cyber-Shot DSC-W830 Flash Capacitor Replacement, Button Board: paso 7, imagen 2 de 2
    • Gently release the button board from the clips.

    • Be careful when lifting the button board; the ribbon cable will still be attached.

  8. Sony Cyber-Shot DSC-W830 Flash Capacitor Replacement: paso 8, imagen 1 de 2 Sony Cyber-Shot DSC-W830 Flash Capacitor Replacement: paso 8, imagen 2 de 2
    • Disconnect the no-fuss ribbon cable by gently pulling it out of the button board.

  9. Sony Cyber-Shot DSC-W830 Flash Capacitor Replacement, Flash Capacitor: paso 9, imagen 1 de 3 Sony Cyber-Shot DSC-W830 Flash Capacitor Replacement, Flash Capacitor: paso 9, imagen 2 de 3 Sony Cyber-Shot DSC-W830 Flash Capacitor Replacement, Flash Capacitor: paso 9, imagen 3 de 3
    • Caution: Be careful not to touch the capacitor wires as you work. If possible, use a capacitor discharge probe to safely rid the capacitors of dangerous charges.

    • Lift the capacitor from the assembly.

    • Disconnect the no-fuss ribbon cable by gently pulling it out of the flash board.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Tong Tang

Miembro Desde 15/09/16

536 Reputación

4 Guías creadas

Equipo

USF Tampa, Team 17-1, Blackwell Fall 2016 Miembro de USF Tampa, Team 17-1, Blackwell Fall 2016

USFT-BLACKWELL-F16S17G1

4 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 4

Ultimos 30 días: 8

Todo El Tiempo: 661