Saltar al contenido principal

Sony BDP-BX620 Port Board Replacement

Qué necesitas

  1. Sony BDP-BX620 Port Board Replacement, Outer Cover: paso 1, imagen 1 de 2 Sony BDP-BX620 Port Board Replacement, Outer Cover: paso 1, imagen 2 de 2
    • Power on the device, eject the disk tray, and power off the device.

    • Turn the device over.

    • Lightly apply downward pressure on the black covering on the disk tray until it comes off.

    • Caution, applying too much pressure can break the black covering.

  2. Sony BDP-BX620 Port Board Replacement: paso 2, imagen 1 de 2 Sony BDP-BX620 Port Board Replacement: paso 2, imagen 2 de 2
    • Turn the device around.

    • Using a Phillips screw driver, remove the screws on both ends of the device circled red in the image.

    • Slide the side covers on either side towards the back of the device.

    • There is a back cover on either side of the device.

  3. Sony BDP-BX620 Port Board Replacement: paso 3, imagen 1 de 3 Sony BDP-BX620 Port Board Replacement: paso 3, imagen 2 de 3 Sony BDP-BX620 Port Board Replacement: paso 3, imagen 3 de 3
    • This step might require someone to help unclasping the plastic clips.

    • Turn the device so that the bottom is facing up.

    • In the bottom, unclip the three plastic clips circled in red.

    • On either side, unclip the plastic clip circled in red

    • Slide the black covering forwards to remove.

    • All five clips have to be unclasped for the covering to be removed.

    • Careful not to break the plastic clips when putting it back on.

  4. Sony BDP-BX620 Port Board Replacement, Port Board: paso 4, imagen 1 de 2 Sony BDP-BX620 Port Board Replacement, Port Board: paso 4, imagen 2 de 2
    • Now, spot the large ribbon cable that connects between the motherboard and the port board.

    • Remove the cable by pulling upwards.

    • Be careful when pulling upwards on the ribbon cable. Too much force can cause it to rip.

  5. Sony BDP-BX620 Port Board Replacement: paso 5, imagen 1 de 1
    • Use your Phillips screwdriver to take out the silver screw holding in the port board.

  6. Sony BDP-BX620 Port Board Replacement: paso 6, imagen 1 de 1
    • Now use the tweezers to unclip the portboard on the side.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Zachery Zavala

Miembro Desde 10/05/16

175 Reputación

2 Guías creadas

Equipo

USF Tampa, Team 1-6, Lacy Fall 2016 Miembro de USF Tampa, Team 1-6, Lacy Fall 2016

USFT-LACY-F16S1G6

4 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 156