Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
This guide requires you to take out at least 10 screws. Be extremely careful with where you place them so that you can replace the mount without leaving out the required screws.
Qué necesitas
-
-
Orient your camera so that you are looking at the bottom portion.
-
Using a JIS #00 screwdriver, remove the 7 screws that are securing the metal plate to the bottom of your camera.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.