Repara tus cosas

Derecho a reparar

Partes y herramientas

Sony Alpha a7S II Viewfinder Plate Replacement

Escrito Por: Brittany Pourciau (y 2 de otros participantes)
  • Comentarios: 0
  • Favoritos: 0
  • Terminaciones: 1

Dificultad

Moderar

Pasos

7

Tiempo Requerido

7 minutos

Secciones

2

Banderas

0

Introducción

If your viewfinder is cracked and hard to remove, please follow the guide as closely as possible to avoid damaging the camera and yourself.

Herramientas

Comprar estas herramientas

Partes

No se especificaron partes.

  1. Orient your camera so that you are looking at the posterior portion.

    • Orient your camera so that you are looking at the posterior portion.

    Editar

  2. Place each of your thumbs on the interior portions of the eyepiece cup, pressing down and pushing up.

    • Place each of your thumbs on the interior portions of the eyepiece cup, pressing down and pushing up.

    Editar

  3. Slide the eyepiece off by carefully pulling it upward.

    • Slide the eyepiece off by carefully pulling it upward.

    • Be careful not to come into contact with the viewfinder lens as the lens can be easily scratched.

    Editar

  4. Kits para Nintendo Switch

    Una solución rápida para volver al juego

    Comprar kits de Switch

    Kits para Nintendo Switch

    Una solución rápida para volver al juego

    Comprar kits de Switch

  5. Remove the screw from the middle of the diopter with the JIS #00 screwdriver.

    • Remove the screw from the middle of the diopter with the JIS #00 screwdriver.

    Editar

  6. Remove the diopter with your hands. If the diopter is at all stuck you can use the pointed tweezers to help aid in the removal process.

    • Remove the diopter with your hands. If the diopter is at all stuck you can use the pointed tweezers to help aid in the removal process.

    • Be careful not to let fingers or tweezers come into contact with the viewfinder lens as the lens can be easily scratched.

    Editar

  7. Remove the 4 screws on the viewfinder plate with a JIS #00 screwdriver.

    • Remove the 4 screws on the viewfinder plate with a JIS #00 screwdriver.

    Editar

  8. Carefully remove the plastic viewfinder plate from the camera. Carefully remove the plastic viewfinder plate from the camera.

    • Carefully remove the plastic viewfinder plate from the camera.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar un comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 5

Ultimos 7 días: 30

Ultimos 30 días: 83

Todo El Tiempo: 775