Repara tus cosas Comunidad Tienda

Sony Alpha NEX-C3 LCD Screen Replacement

Introducción

The LCD screen is a helpful display when taking photos. A cracked or damaged screen needs replacement.

Qué necesitas

  1. Sony Alpha NEX-C3 LCD Screen Replacement, LCD Screen: paso 1, imagen 1 de 1

    • Turn off the camera by sliding the power switch.

    Editar

  2. Sony Alpha NEX-C3 LCD Screen Replacement: paso 2, imagen 1 de 1

    • Tilt up the LCD screen.

    Editar

  3. Sony Alpha NEX-C3 LCD Screen Replacement: paso 3, imagen 1 de 1

    • Use a Phillips head 000 screwdriver to remove the two 2.0mm screws on the bottom of the LCD screen.

    Editar

  5. Sony Alpha NEX-C3 LCD Screen Replacement: paso 4, imagen 1 de 3 Sony Alpha NEX-C3 LCD Screen Replacement: paso 4, imagen 2 de 3 Sony Alpha NEX-C3 LCD Screen Replacement: paso 4, imagen 3 de 3

    • Use a Phillips head 000 screwdriver to remove the two 1.0mm screws on the smaller backplate of the LCD screen that covers the ribbon cable.

    • The smaller backplate should easily come off. Put it to the side.

    Editar

  6. Sony Alpha NEX-C3 LCD Screen Replacement: paso 5, imagen 1 de 2 Sony Alpha NEX-C3 LCD Screen Replacement: paso 5, imagen 2 de 2

    • Use a Phillips head 000 screwdriver to remove the two 1.0mm screws on the bigger backplate of the LCD.

    Editar

  7. Sony Alpha NEX-C3 LCD Screen Replacement: paso 6, imagen 1 de 2 Sony Alpha NEX-C3 LCD Screen Replacement: paso 6, imagen 2 de 2

    • Using the plastic opening tool, remove the larger backplate from the LCD screen.

    Editar

  8. Sony Alpha NEX-C3 LCD Screen Replacement: paso 7, imagen 1 de 1

    • With your hands, gently remove the black plastic piece on the backside of the LCD screen.

    Editar

  9. Sony Alpha NEX-C3 LCD Screen Replacement: paso 8, imagen 1 de 2 Sony Alpha NEX-C3 LCD Screen Replacement: paso 8, imagen 2 de 2

    • Using tweezers, gently pull up and away on the ribbon cable connected to the motherboard, after which, the LCD screen should come off.

    • The motherboard ribbon cable has a specific connector.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order. However, when installing the ribbon cable, the connector has a specific step. The connector has a tiny flap that clamps down onto the ribbon cable in order to make it secure.

Una persona más ha completado esta guía.

Autor

con 3 otros colaboradores

Jonathan Chen

Miembro Desde 10/17/17

690 Reputación

6 Guías creadas

Insignias: 13

+ 10 más insignias

Equipo

UC Santa Barbara, Team S1-G1, Weedon Fall 2017 Miembro de UC Santa Barbara, Team S1-G1, Weedon Fall 2017

UCSB-WEEDON-F17S1G1

3 Miembros

13 Guías creadas

Un comentario

Sir, my unit has many lines that appear on the screen. However, the lcd glass is pristine & has no cracks. Which part is defective? Is the lcd mother board the culprit? Thank you.

Stevie B - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 6

Ultimos 30 días: 20

Todo El Tiempo: 2,454