Saltar al contenido principal

Sony Alpha NEX-C3 Control Wheel Replacement

Qué necesitas

  1. Sony Alpha NEX-C3 Control Wheel Replacement, Top Panel: paso 1, imagen 1 de 1
    • Turn the camera off by sliding the power switch.

  2. Sony Alpha NEX-C3 Control Wheel Replacement: paso 2, imagen 1 de 1
    • Use a Phillips head 000 screwdriver to remove the 4.0mm screw inside the USB port.

  3. Sony Alpha NEX-C3 Control Wheel Replacement: paso 3, imagen 1 de 1
    • Use a Phillips head 000 screwdriver to remove the one 4.0mm screw on the side opposite of the USB port near the shutter button.

  4. Sony Alpha NEX-C3 Control Wheel Replacement: paso 4, imagen 1 de 2 Sony Alpha NEX-C3 Control Wheel Replacement: paso 4, imagen 2 de 2
    • Open the flap at the top of the camera.

    • Use a Phillips head 000 screwdriver to remove the two 4.0mm screws inside.

  5. Sony Alpha NEX-C3 Control Wheel Replacement: paso 5, imagen 1 de 1
    • Gently lift off the top panel with your hands.

  6. Sony Alpha NEX-C3 Control Wheel Replacement, Back Panel: paso 6, imagen 1 de 1
    • Use a Phillips head 000 screwdriver to remove the 4.0mm screw at the side opposite of the USB port.

  7. Sony Alpha NEX-C3 Control Wheel Replacement: paso 7, imagen 1 de 2 Sony Alpha NEX-C3 Control Wheel Replacement: paso 7, imagen 2 de 2
    • Use a Phillips head 000 screwdriver to remove the three 4.0mm screws on the bottom of the camera.

  8. Sony Alpha NEX-C3 Control Wheel Replacement: paso 8, imagen 1 de 1
    • Tilt up the LCD screen.

    • Use a Phillips head 000 screwdriver to remove the two coarse 4.0mm screws near the bottom of the camera.

  9. Sony Alpha NEX-C3 Control Wheel Replacement: paso 9, imagen 1 de 1
    • Gently pry off the back panel, by wiggling it around the LCD screen.

  10. Sony Alpha NEX-C3 Control Wheel Replacement, Control Wheel: paso 10, imagen 1 de 2 Sony Alpha NEX-C3 Control Wheel Replacement, Control Wheel: paso 10, imagen 2 de 2
    • Tilt up the LCD screen.

    • Grab the silver plate, and gently pry it up.

  11. Sony Alpha NEX-C3 Control Wheel Replacement: paso 11, imagen 1 de 2 Sony Alpha NEX-C3 Control Wheel Replacement: paso 11, imagen 2 de 2
    • Gently pinch blue ribbon cable, and pull it out of the port.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Jonathan Chen

Miembro Desde 10/17/17

690 Reputación

6 Guías creadas

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 9

Ultimos 30 días: 36

Todo El Tiempo: 3,112