Saltar al contenido principal

Introducción

The lens release button is a component of the camera body, and is used to release the lens from the camera body. This button can become stuck, stopping one from removing or switching lenses.

Partes

No se especificaron partes.

  1. Sony Alpha NEX-5N Lens Release Button Replacement, E-mount: paso 1, imagen 1 de 2 Sony Alpha NEX-5N Lens Release Button Replacement, E-mount: paso 1, imagen 2 de 2
    • While completing this guide, do not touch the image sensor (the center rectangle encircled by the lens mount).

    • Unscrew the 4 silver 1.2 mm Phillips #000 screws along the front outer lens mount.

    • Applying extra force to unscrew these 4 screws may be necessary.

    • Detach the outer lens mount ring.

  2. Sony Alpha NEX-5N Lens Release Button Replacement: paso 2, imagen 1 de 2 Sony Alpha NEX-5N Lens Release Button Replacement: paso 2, imagen 2 de 2
    • Pay attention to the positioning and order of the spacing rings for reassembly.

    • Using your fingers, pull out the first black spacer ring.

    • Repeat the previous step for the second silver spacer ring.

  3. Sony Alpha NEX-5N Lens Release Button Replacement: paso 3, imagen 1 de 3 Sony Alpha NEX-5N Lens Release Button Replacement: paso 3, imagen 2 de 3 Sony Alpha NEX-5N Lens Release Button Replacement: paso 3, imagen 3 de 3
    • Unscrew the 2 silver 1.2 mm Phillips #000 screws on opposing sides in the lens ring area.

    • Using your fingers, easily pull off lens housing. This will complete the removal of the E-mount.

    • The lens release button and the small spring underneath will be loose.

  4. Sony Alpha NEX-5N Lens Release Button Replacement, Lens Release Button: paso 4, imagen 1 de 3 Sony Alpha NEX-5N Lens Release Button Replacement, Lens Release Button: paso 4, imagen 2 de 3 Sony Alpha NEX-5N Lens Release Button Replacement, Lens Release Button: paso 4, imagen 3 de 3
    • Find the lens release button.

    • The button should be easily removed by hand.

  5. Sony Alpha NEX-5N Lens Release Button Replacement: paso 5, imagen 1 de 1
    • After removing the button, the spring underneath it is uncovered and can be replaced.

    • This completes the removal of the lens release button.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Anna Tole

Miembro Desde 28/09/15

191 Reputación

1 Guía escrita

Un comentario

What to do if the lens is attached to the camera and the release button is stuck?

on a Nikon d7100.

ajbakh - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 8

Todo El Tiempo: 1,660