Repara tus cosas Comunidad Tienda

Sony Alpha ILCE-6000 E-mount Replacement

Introducción

If there is a problem mounting the lens onto your Sony Alpha ILCE-6000 , this guide will help you replace the E-mount ring.

Qué necesitas

  1. Sony Alpha ILCE-6000 E-mount Replacement, Lens: paso 1, imagen 1 de 1

    • Turn of camera by turning the switch to OFF.

    Editar

  2. Sony Alpha ILCE-6000 E-mount Replacement: paso 2, imagen 1 de 1

    • Use the finger, press and hold the release black circle button ( on the bottom ) next to the lens on the front of the camera.

    Editar

  3. Sony Alpha ILCE-6000 E-mount Replacement: paso 3, imagen 1 de 2 Sony Alpha ILCE-6000 E-mount Replacement: paso 3, imagen 2 de 2

    • Using the left hand or the right hand to hold the camera body, other hand twist the lens counterclockwise and pull it off.

    • Align the white dot of the lens to the white dot on the camera mount to completely replace.

    Editar

  5. Sony Alpha ILCE-6000 E-mount Replacement, E-mount Replacement: paso 4, imagen 1 de 2 Sony Alpha ILCE-6000 E-mount Replacement, E-mount Replacement: paso 4, imagen 2 de 2

    • Locate the E-mount on the front of the camera

    Editar

  6. Sony Alpha ILCE-6000 E-mount Replacement: paso 5, imagen 1 de 3 Sony Alpha ILCE-6000 E-mount Replacement: paso 5, imagen 2 de 3 Sony Alpha ILCE-6000 E-mount Replacement: paso 5, imagen 3 de 3

    • Take a Philips head 00 screw to remove the four of the 5.1mm screws located on the E-mount.

    Editar

  7. Sony Alpha ILCE-6000 E-mount Replacement: paso 6, imagen 1 de 3 Sony Alpha ILCE-6000 E-mount Replacement: paso 6, imagen 2 de 3 Sony Alpha ILCE-6000 E-mount Replacement: paso 6, imagen 3 de 3

    • After removing the screws, pull off the E-mount metal ring gently and wiggle it until its free.

    • Remove the plastic ring located under the metal ring.

    • Do not remove the metal piece that is located behind the plastic ring.

    Editar

  8. Sony Alpha ILCE-6000 E-mount Replacement: paso 7, imagen 1 de 1

    • Replace the plastic E-mount ring with a new one.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Yirga Yilma

Miembro Desde 02/02/17

221 Reputación

2 Guías creadas

Insignias: 6

+ 3 más insignias

Equipo

UW Tacoma, Team 1-4, Rose Winter 2017 Miembro de UW Tacoma, Team 1-4, Rose Winter 2017

UWT-ROSE-W17S1G4

4 Miembros

10 Guías creadas

2 comentarios

Hello folks,

actually I have to replace the E-mount ring my ILCE-6000, which seems very easy with this description. Thanks a lot for this!

Is the ring available anywhere on this globe? I would truly appreciate any hint.

Best regards, JDK

JDK - Contestar

Hi there, found a source for the ring as original part. The price is reasonable. Now waiting for delivery ...

Best regards, JDK

JDK - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 20

Ultimos 30 días: 56

Todo El Tiempo: 3,570