Sonos Playbase Main Speaker Array Replacement

Introducción

Caution: Unplug the Sonos Playbase before starting the disassembly to avoid electrocuting yourself.

Replacement of a main speaker requires iFixit prying tools and screwdrivers. Optionally, a heat source helps to more easily remove adhesive while opening up your device.

Qué necesitas

Paso 1 Bottom Panel

Sonos Playbase Main Speaker Array Replacement, Bottom Panel: paso 1, imagen 1 de 3

Sonos Playbase Main Speaker Array Replacement, Bottom Panel: paso 1, imagen 2 de 3

Sonos Playbase Main Speaker Array Replacement, Bottom Panel: paso 1, imagen 3 de 3

Herramienta utilizada en este paso:

Pro Tech Toolkit

$74.95

Comprar

Turn the Playbase upside down so that the "Sonos Playbase" imprint is face up.
Remove the bottom panel with an Opening Tool by inserting underneath and prying upwards.
Melt the adhesive with an iOpener for ease of opening
Use a Metal Spudger if the plastic spudgers do not work.
Take care to avoid damaging the plastic or the device if using a metal spudger.

Editar

Paso 2

Herramienta utilizada en este paso:

Pro Tech Toolkit

$74.95

Comprar

Remove the fourteen 11mm T-10 screws by turning counter-clockwise.
Remove the seven 44mm T-20 screws by turning counter-clockwise.
Remove the twenty-two 34mm T-20 screws by turning counter-clockwise.
Record where each screw belongs for easier reassembly.

Editar

Paso 3

Herramienta utilizada en este paso:

Pro Tech Toolkit

$74.95

Comprar

Remove the metal plate with a Opening Tool by inserting underneath and prying upwards.
Use a metal spudger if plastic openers do not work.
Take care to avoid damaging the plastic or the device if using a metal spudger.

Editar

Paso 4 Main Speaker Array

Sonos Playbase Main Speaker Array Replacement, Main Speaker Array: paso 4, imagen 1 de 2

Sonos Playbase Main Speaker Array Replacement, Main Speaker Array: paso 4, imagen 2 de 2

Disconnect the main speaker array from the main board, by pinching and and pulling the tab out.
See Recognizing & Disconnecting Cable Connectors for more information.

Editar

Paso 5

Remove the side speakers from the green printed circuit board (PCB) running along the top of the main speaker array by pinching and pulling out the connector.
See Recognizing & Disconnecting Cable Connectors for more information.

Editar

Paso 6

Sonos Playbase Main Speaker Array Replacement: paso 6, imagen 3 de 3

Herramienta utilizada en este paso:

Pro Tech Toolkit

$74.95

Comprar

Remove the two 16mm T-20 screws located on both sides of the main speaker array by turning counter-clockwise.

Editar

Paso 7

Remove the main speaker array by gripping it on both sides and pulling it out.
The array may require a significant amount of force to remove.
Use prying tools as necessary to remove the main speaker array if you are unsuccessful using your hands.
Do not to yank the array out too suddenly or too far as this may damage the device.