Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:Pro Tech Toolkit$59.96-
Turn the Playbase upside down so that the "Sonos Playbase" imprint is face up.
-
Remove the bottom panel with an Opening Tool by inserting underneath and prying upwards.
-
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:Pro Tech Toolkit$59.96 -
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:Pro Tech Toolkit$59.96-
Remove the metal plate with a Opening Tool by inserting underneath and prying upwards.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect the main speaker array from the main board, by pinching and and pulling the tab out.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the side speakers from the green printed circuit board (PCB) running along the top of the main speaker array by pinching and pulling out the connector.
-
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:Pro Tech Toolkit$59.96-
Remove the two 16mm T-20 screws located on both sides of the main speaker array by turning counter-clockwise.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the main speaker array by gripping it on both sides and pulling it out.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Prop the removed main speaker array up on top of the main circuit board.
-
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:Pro Tech Toolkit$59.96-
Lift the main speaker array to reveal the IR receiver underneath.
-
Remove the three 11 mm T-5 screws by turning counter-clockwise.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove ZIF connectors by lifting the black tabs and pulling the ribbon out.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the IR receiver by grasping it with two fingers and pulling up.
-