Sonos Playbase Bottom Panel Replacement

Introducción

This guide shows how to replace the bottom panel on the Sonos Playbase. These steps may require the use of an adhesive melter as well as an adhesive to reattach the panel.

Caution: Unplug the Sonos Playbase before starting the disassembly to avoid electrocuting yourself.

Qué necesitas

Paso 1 Bottom Panel

Sonos Playbase Bottom Panel Replacement, Bottom Panel: paso 1, imagen 1 de 3

Sonos Playbase Bottom Panel Replacement, Bottom Panel: paso 1, imagen 2 de 3

Sonos Playbase Bottom Panel Replacement, Bottom Panel: paso 1, imagen 3 de 3

Herramienta utilizada en este paso:

Pro Tech Toolkit

$74.95

Comprar

Turn the Playbase upside down so that the "Sonos Playbase" imprint is face up.
Remove the bottom panel with an Opening Tool by inserting underneath and prying upwards.
Melt the adhesive with an iOpener for ease of opening
Use a Metal Spudger if the plastic spudgers do not work.
Take care to avoid damaging the plastic or the device if using a metal spudger.

Editar

Paso 2

Herramienta utilizada en este paso:

Pro Tech Toolkit

$74.95

Comprar

Remove the fourteen 11mm T-10 screws by turning counter-clockwise.
Remove the seven 44mm T-20 screws by turning counter-clockwise.
Remove the twenty-two 34mm T-20 screws by turning counter-clockwise.
Record where each screw belongs for easier reassembly.

Editar

Paso 3

Herramienta utilizada en este paso:

Pro Tech Toolkit

$74.95

Comprar

Remove the metal plate with a Opening Tool by inserting underneath and prying upwards.
Use a metal spudger if plastic openers do not work.
Take care to avoid damaging the plastic or the device if using a metal spudger.