Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
This guide covers how to disassemble the solar panel portion of the device for both a complete removal and a replacement of the solar panel in a step-by-step instruction.
Qué necesitas
-
Herramienta utilizada en este paso:iFixit Opening Picks (Set of 6)$4.99
-
There are many clips inside the device holding the plastic panel in place. To remove them you must slide your iFixit Opening Picks along the edges of the panel to either break or loosen the clips.
-
This may take a lot of effort, as the panel is held in extremely tight. Do not be afraid to use force.
-
-
Herramienta utilizada en este paso:iFixit Opening Picks (Set of 6)$4.99
-
Keep on sliding iFixit Opening Picks into the edges of the panel without removing the ones already in place. The panel may reattach if the clips are not completely broken.
-
You must also slide iFixit Opening Picks between the interior edges of the handles, as the clips are inside as well.
-
-
Herramienta utilizada en este paso:Phillips #00 Screwdriver$5.49
-
Take your Phillips # 00 Screwdriver and begin to unscrew the two black screws.
-
-
Herramienta utilizada en este paso:Flush Cutter$29.99
-
Place the solar panel on a surface that you can solder on.
-
Cut the two wires connecting the circuit board to the solar panel at the base near the solar panel by using wire cutters.
-
Take out your Soldering Station. With your new solar panel, solder each lead back to the circuit board, ensuring the positive and negative leads match up correctly as displayed in the photo. Refer to the Repairing Soldered Connection Guide.
-
Put the device back together following the same guide in reverse order.
-
When you reach step 8, apply your Evo-Stick Super Glue along the edges of the plastic panel.
-
Press the panel back into place on the device. Let it sit and dry for 24 hours before use.
-
Enjoy your working device!
-
For reassembly of the device, please follow the instructions in the reverse order.
For reassembly of the device, please follow the instructions in the reverse order.
Cancelar: No complete esta guía.
4 personas más completaron esta guía.