Repara tus cosas Comunidad Tienda

Solio Rocsta Internal Components Replacement

Guía Archivada
Esta guía se mantiene únicamente para fines históricos. Utiliza la última versión de la guía para llevar a cabo tu reparación.

Introducción

This guide shows you how to remove the battery and motherboard from the body of the Solio Rocsta.

Qué necesitas

  1. Solio Rocsta Internal Components Replacement, Internal Components: paso 1, imagen 1 de 1

    • Remove the three 7mm Torx T7 screws.

    Traducir

  2. Solio Rocsta Internal Components Replacement: paso 2, imagen 1 de 3 Solio Rocsta Internal Components Replacement: paso 2, imagen 2 de 3 Solio Rocsta Internal Components Replacement: paso 2, imagen 3 de 3

    • Insert the flat end of the spudger between the top panel and the body.

    • Use the spudger as a lever to carefully pry apart the two panels.

    • As you pry, take care not to break the small orange clip holding the top to the body.

    • Lift the panel above and away to disconnect the panel from the body.

    • Be careful when lifting because you could break the wiring connecting the motherboard to the panel.

    Traducir

  3. Solio Rocsta Internal Components Replacement: paso 3, imagen 1 de 2 Solio Rocsta Internal Components Replacement: paso 3, imagen 2 de 2

    • Lift the panel off the body and set it next to the device.

    • Remember to use caution when lifting because you could break the wiring connecting the motherboard to the panel.

    Traducir

  5. Solio Rocsta Internal Components Replacement: paso 4, imagen 1 de 1

    • Remove the two 6mm Torx T6 screws from the motherboard.

    Traducir

  6. Solio Rocsta Internal Components Replacement: paso 5, imagen 1 de 2 Solio Rocsta Internal Components Replacement: paso 5, imagen 2 de 2

    • Lift the end of the USB cord out of the body.

    • The cord fits over an orange peg.

    Traducir

  7. Solio Rocsta Internal Components Replacement: paso 6, imagen 1 de 3 Solio Rocsta Internal Components Replacement: paso 6, imagen 2 de 3 Solio Rocsta Internal Components Replacement: paso 6, imagen 3 de 3

    • Lift up the battery with your fingers or with the flat end of the spudger.

    • Be prepared to use force because the battery is adhered to the body.

    • Do not try to remove the battery completely because the wiring connects to the motherboard.

    Traducir

  8. Solio Rocsta Internal Components Replacement: paso 7, imagen 1 de 2 Solio Rocsta Internal Components Replacement: paso 7, imagen 2 de 2

    • Remove the battery and the motherboard from the body.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 3 otros colaboradores

Aimee Whiteside

Miembro Desde 05/21/15

1 Reputación

1 Guía escrita

Insignias: 4

+1 mas insignia

Equipo

iFixit, Team 1-1, Goldberg SU 2015 Miembro de iFixit, Team 1-1, Goldberg SU 2015

FIX-GOLDBERG-SU15S1G1

3 Miembros

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 58