Saltar al contenido principal

Sol Republic Deck Bluetooth Button Replacement

Qué necesitas

  1. Sol Republic Deck Bluetooth Button Replacement, Bluetooth Button: paso 1, imagen 1 de 1
    • With plastic spudger wedge in between the top and bottom casings to force sepearation . Exposing the inside components of the Republic Deck.

  2. Sol Republic Deck Bluetooth Button Replacement: paso 2, imagen 1 de 1
    • Use the screwdriver to unscrew two 3.6mm Phillips #0 screws securing the plastic plate.

  3. Sol Republic Deck Bluetooth Button Replacement: paso 3, imagen 1 de 1
    • Remove the ribbon cable from the circuit board.

  4. Sol Republic Deck Bluetooth Button Replacement: paso 4, imagen 1 de 1
    • Plug in de-soldering kit and wait 3 minutes for the solder to heat up.

    • Use the tip of your soldering iron to heat the old solder unit and apply until it melts.

    • Remove speaker wires connecting the speaker to the circuit board.

  5. Sol Republic Deck Bluetooth Button Replacement: paso 5, imagen 1 de 1
    • Unscrew five 3.6 mm Phillips #0 screws securing the circuit board.

  6. Sol Republic Deck Bluetooth Button Replacement: paso 6, imagen 1 de 1
    • Unscrew fifteen 6.2mm Phillips #0 screws and lift the black plastic plate from the case.

  7. Sol Republic Deck Bluetooth Button Replacement: paso 7, imagen 1 de 2 Sol Republic Deck Bluetooth Button Replacement: paso 7, imagen 2 de 2
    • Remove the three 3.6mm Phillips #0 screws.

    • Remove the circuit board containing the BlueTooth button.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Equipo

IUPUI, Team S3-G1, Baechle Spring 2017 Miembro de IUPUI, Team S3-G1, Baechle Spring 2017

IUPUI-BAECHLE-S17S3G1

3 Miembros

3 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 5

Todo El Tiempo: 561