Repara tus cosas Comunidad Tienda

SodaStream Source Internal Rubber Seal Replacement

Introducción

The SodaStream Source carbonates water and adds flavor through its nozzle. This nozzle has a rubber seal to help prevent leakage and stabilize the carbonating block while making soda. If the seal is damaged, replacing it will stop leaking during your soda's creation. To replace this seal external and internal disassembly is required. This guide shows you how to access and remove a damaged seal.

Qué necesitas

  1. SodaStream Source Internal Rubber Seal Replacement, SodaStream Source External Disassembly: paso 1, imagen 1 de 3 SodaStream Source Internal Rubber Seal Replacement, SodaStream Source External Disassembly: paso 1, imagen 2 de 3 SodaStream Source Internal Rubber Seal Replacement, SodaStream Source External Disassembly: paso 1, imagen 3 de 3

    • Remove the soda bottle and the CO₂ canister from the machine.

    Traducir

  2. SodaStream Source Internal Rubber Seal Replacement: paso 2, imagen 1 de 2 SodaStream Source Internal Rubber Seal Replacement: paso 2, imagen 2 de 2
    Herramienta utilizada en este paso:
    Phillips #1 Screwdriver
    $8.99
    Comprar
    Traducir

  3. SodaStream Source Internal Rubber Seal Replacement: paso 3, imagen 1 de 2 SodaStream Source Internal Rubber Seal Replacement: paso 3, imagen 2 de 2

    • Pull the outer cover away from the front of the device.

    Traducir

  4. SodaStream Source Internal Rubber Seal Replacement: paso 4, imagen 1 de 1
    Herramienta utilizada en este paso:
    Phillips #1 Screwdriver
    $8.99
    Comprar
    Traducir

  5. SodaStream Source Internal Rubber Seal Replacement: paso 5, imagen 1 de 2 SodaStream Source Internal Rubber Seal Replacement: paso 5, imagen 2 de 2
    Herramienta utilizada en este paso:
    Jimmy
    $7.95
    Comprar

    • Firmly pull the front cover off.

    • This piece is difficult to remove and requires force. It may help to use a wide, thin object to pry it off (like a Jimmy).

    Traducir

  6. SodaStream Source Internal Rubber Seal Replacement, SodaStream Source Internal Disassembly: paso 6, imagen 1 de 3 SodaStream Source Internal Rubber Seal Replacement, SodaStream Source Internal Disassembly: paso 6, imagen 2 de 3 SodaStream Source Internal Rubber Seal Replacement, SodaStream Source Internal Disassembly: paso 6, imagen 3 de 3

    • Push the brass bar, located in the top of the device, out of the carbonating block.

    • You can use the end of your screwdriver to push this piece out.

    Traducir

  7. SodaStream Source Internal Rubber Seal Replacement: paso 7, imagen 1 de 3 SodaStream Source Internal Rubber Seal Replacement: paso 7, imagen 2 de 3 SodaStream Source Internal Rubber Seal Replacement: paso 7, imagen 3 de 3

    • Slide the yellow battery cover up and away to remove it from the device.

    Traducir

  9. SodaStream Source Internal Rubber Seal Replacement: paso 8, imagen 1 de 2 SodaStream Source Internal Rubber Seal Replacement: paso 8, imagen 2 de 2

    • Unhook the bottom piece of the plastic arm on each side of the device.

    Traducir

  10. SodaStream Source Internal Rubber Seal Replacement: paso 9, imagen 1 de 2 SodaStream Source Internal Rubber Seal Replacement: paso 9, imagen 2 de 2

    • Lift the top of the plastic arm with the spudger and remove it on both sides.

    Traducir

  11. SodaStream Source Internal Rubber Seal Replacement: paso 10, imagen 1 de 2 SodaStream Source Internal Rubber Seal Replacement: paso 10, imagen 2 de 2

    • Remove the plastic piece, located near the front of the carbonating block, from both sides of the device using a plastic opening tool or nylon spudger.

    Traducir

  12. SodaStream Source Internal Rubber Seal Replacement: paso 11, imagen 1 de 2 SodaStream Source Internal Rubber Seal Replacement: paso 11, imagen 2 de 2

    • Remove the plastic oval and the spring within it.

    Traducir

  13. SodaStream Source Internal Rubber Seal Replacement: paso 12, imagen 1 de 2 SodaStream Source Internal Rubber Seal Replacement: paso 12, imagen 2 de 2

    • Pull the loader tab cover down and away from the rest of the carbonating block.

    Traducir

  14. SodaStream Source Internal Rubber Seal Replacement: paso 13, imagen 1 de 1

    • Remove the three 17.9 mm screws located on the right side.

    • These screws may be difficult to access.

    Traducir

  15. SodaStream Source Internal Rubber Seal Replacement: paso 14, imagen 1 de 2 SodaStream Source Internal Rubber Seal Replacement: paso 14, imagen 2 de 2

    • Unhook the four clips on the top of the carbonating block and remove the plastic cover.

    Traducir

  16. SodaStream Source Internal Rubber Seal Replacement: paso 15, imagen 1 de 3 SodaStream Source Internal Rubber Seal Replacement: paso 15, imagen 2 de 3 SodaStream Source Internal Rubber Seal Replacement: paso 15, imagen 3 de 3

    • Lift the clips located on both sides with the plastic spudger. Slide the front cover off.

    Traducir

  17. SodaStream Source Internal Rubber Seal Replacement: paso 16, imagen 1 de 2 SodaStream Source Internal Rubber Seal Replacement: paso 16, imagen 2 de 2

    • Unhook the silver spring arms on both sides of the device by pushing down.

    Traducir

  18. SodaStream Source Internal Rubber Seal Replacement: paso 17, imagen 1 de 1

    • Grip the right and left sides of the device and pull it into two identical halves.

    • Once these two pieces are apart, all remaining internal components will fall out of the device.

    Traducir

  19. SodaStream Source Internal Rubber Seal Replacement: paso 18, imagen 1 de 3 SodaStream Source Internal Rubber Seal Replacement: paso 18, imagen 2 de 3 SodaStream Source Internal Rubber Seal Replacement: paso 18, imagen 3 de 3

    • Pull the foam pad up and remove it from the front side of the carbonation component.

    Traducir

  20. SodaStream Source Internal Rubber Seal Replacement: paso 19, imagen 1 de 1

    • Remove the six 17.7 mm screws from the underside of the loader tab piece.

    Traducir

  21. SodaStream Source Internal Rubber Seal Replacement: paso 20, imagen 1 de 3 SodaStream Source Internal Rubber Seal Replacement: paso 20, imagen 2 de 3 SodaStream Source Internal Rubber Seal Replacement: paso 20, imagen 3 de 3

    • Pull the loader tab out of the nozzle.

    Traducir

  22. SodaStream Source Internal Rubber Seal Replacement, Internal Rubber Seal: paso 21, imagen 1 de 2 SodaStream Source Internal Rubber Seal Replacement, Internal Rubber Seal: paso 21, imagen 2 de 2

    • Remove the rubber seal from the nozzle piece and replace with the new seal.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

29 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Alexandra I Curtis

Miembro Desde 02/20/17

989 Reputación

2 Guías creadas

Insignias: 16

+ 13 más insignias

Equipo

USF Tampa, Team S1-G4, Leahy Spring 2017 Miembro de USF Tampa, Team S1-G4, Leahy Spring 2017

USFT-LEAHY-S17S1G4

3 Miembros

40 Guías creadas

50 comentarios

Where can I purchase the internal rubber seal? Thanks Ronzo (Australia)

Ron Hayes - Contestar

I’ll ask the same question as the gentleman above. Where can I purchase the rubber gasket seal? I cannot find it anywhere online. I would also like to purchase the gas delivery tube and is installed.

Thank you

Peter (USA)

Peter De Luca - Contestar

Our sodastream does not work anymore. It’s the electrick model with three different gasfillings. When you put the waterbottle into the filling station and then you turn your suitably filled bottle down and you try to push some of those lights (- /--/ ---) for to fill your bottle, it sounds like little choked “puff” and then all lights are blinking (I think they tell mailfunction). No gas comes. I have changed new and stuffed gasbottle, power cable is its place and works. So what’s wrong? Thank You allready, Juha Heikkilä (Finland).

Juha Heikkilä - Contestar

I can’t remove the outer cover, step 3.

Claude Vadeboncoeur - Contestar

I am also looking for a gasket. Do you have any advice?

Zuzana Karlíková - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 88

Ultimos 7 días: 628

Ultimos 30 días: 3,078

Todo El Tiempo: 174,619