Repara tus cosas Comunidad Tienda

Snow Blower Shear Bolt Replacement

Qué necesitas

  1. Snow Blower Shear Bolt Replacement, Locate new shear bolt: paso 1, imagen 1 de 1

    • The new shear bolt is stored on the top of the auger discharge

    Editar

  2. Snow Blower Shear Bolt Replacement, Remove the old shear bolt: paso 2, imagen 1 de 3 Snow Blower Shear Bolt Replacement, Remove the old shear bolt: paso 2, imagen 2 de 3 Snow Blower Shear Bolt Replacement, Remove the old shear bolt: paso 2, imagen 3 de 3

    • The shear bolt attaches the auger to the shaft

    • The shear bolt is designed to break preventing damage to the auger and shaft if an hard object is pulled in

    • Locate the side with the missing shear bolt

    • The left side is missing

    • This auger will spin freely on this side

    • Rotate the auger to find where the bolt is on the shaft

    Editar

  4. Snow Blower Shear Bolt Replacement: paso 3, imagen 1 de 2 Snow Blower Shear Bolt Replacement: paso 3, imagen 2 de 2

    • Use the new shear bolt to push the old broken bolt out of the shaft

    • It should fall out and look like this

    Editar

  5. Snow Blower Shear Bolt Replacement: paso 4, imagen 1 de 2 Snow Blower Shear Bolt Replacement: paso 4, imagen 2 de 2

    • With the new bolt in place from pushing the old bolt out add a nut

    • Hand tighten

    Editar

  6. Snow Blower Shear Bolt Replacement: paso 5, imagen 1 de 2 Snow Blower Shear Bolt Replacement: paso 5, imagen 2 de 2

    • Using two 7/16" wrenches tighten the nut on the bolt

    • Do not over tighten

    • Congratulations, both shear bolts have been replaced

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 1 otro colaborador

Jacob Rattray

Miembro Desde 05/11/18

263 Reputación

2 Guías creadas

Insignias: 4

+1 mas insignia

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 9

Todo El Tiempo: 1,281