Saltar al contenido principal

Introducción

When the unit shows erratic behavior or the device isn’t installing program s properly, you may look for a shortcut between it’s internal components.

Herramientas

Partes

No se especificaron partes.

  1. Gently open the four plastic tongs with a small slotted  screwdriver, you need to keep the black and silver plastic gently pulled apart. Gently open the four plastic tongs with a small slotted  screwdriver, you need to keep the black and silver plastic gently pulled apart. Gently open the four plastic tongs with a small slotted  screwdriver, you need to keep the black and silver plastic gently pulled apart.
    • Gently open the four plastic tongs with a small slotted screwdriver, you need to keep the black and silver plastic gently pulled apart.

  2. Once separated, there are four hex screws to be  removed. I guess  the size is 5/64” but I’ve used a 2 mm before...
    • Once separated, there are four hex screws to be removed.

    • I guess the size is 5/64” but I’ve used a 2 mm before...

  3. Remove and  separate the components The problem is located in the black film between the  boards which is clearly pinched through The problem is located in the black film between the  boards which is clearly pinched through
    • Remove and separate the components

    • The problem is located in the black film between the boards which is clearly pinched through

  4. Remove the  adhesive, if present.
    • Remove the adhesive, if present.

  5. Prepare a new divider.  I got this piece from a 0.4 mm rigid plastic. I folded the plastic to 90°. I’ve placed and dimensioned the plastic in order to fit  the position in the picture.
    • Prepare a new divider. I got this piece from a 0.4 mm rigid plastic.

    • I folded the plastic to 90°.

    • I’ve placed and dimensioned the plastic in order to fit the position in the picture.

  6. That’s all folks!  Next steps would be to re-assemble it as it was before dissasembly. That’s all folks!  Next steps would be to re-assemble it as it was before dissasembly. That’s all folks!  Next steps would be to re-assemble it as it was before dissasembly.
    • That’s all folks! Next steps would be to re-assemble it as it was before dissasembly.

Conclusión

To re-assemble your device, follow the steps in reverse order.

Un agradecimiento especial a estos traductores:

it en

100%

Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Stefano Ficacci

Miembro Desde 27/05/16

133 Reputación

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 7

Todo El Tiempo: 816