Saltar al contenido principal
  1. Turn the gun on by pressing the power button until the red light blinks.
    • Turn the gun on by pressing the power button until the red light blinks.

    • Turn vision mode off by pressing the power button again.

    • Red light should be flashing in a double blink sequence.

  2. Pull the trigger to release the air in the gun.
    • Pull the trigger to release the air in the gun.

    • Pressurized air can be forceful, causing particles to be ejected from the gun into your eyes and/or skin. When air bubbles enter the bloodstream, they can block blood vessels, causing embolisms. To avoid this, make sure to point the gun in a safe direction when pulling the trigger because air will be released from the gun.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Shane Villalpando

Miembro Desde 02/02/15

1,022 Reputación

10 Guías creadas

Equipo

Cal Poly, Team 8-42, Amido Winter 2015 Miembro de Cal Poly, Team 8-42, Amido Winter 2015

CPSU-AMIDO-W15S8G42

4 Miembros

10 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 38