Repara tus cosas Comunidad Tienda

Small Engine Recoil Starter Replacement

Introducción

This guide will show how to take apart and repair the small engine recoil starter on a lawn mower.

Qué necesitas

  1. Small Engine Recoil Starter Replacement, Recoil Starter: paso 1, imagen 1 de 1

    • To begin the repair remove the protective casing. (This removal may vary with different lawnmowers.)

    Editar

  2. Small Engine Recoil Starter Replacement: paso 2, imagen 1 de 1

    • Locate the recoil housing cap.

    Editar

  3. Small Engine Recoil Starter Replacement: paso 3, imagen 1 de 1

    • Carefully remove the housing cap. (Removal may vary)

    Editar

  5. Small Engine Recoil Starter Replacement: paso 4, imagen 1 de 1

    • After removing the recoil, unscrew the cap that holds the pulley to the recoil starter housing.

    Editar

  6. Small Engine Recoil Starter Replacement: paso 5, imagen 1 de 1

    • Untie the knot in the rope and slide it out of the housing.

    Editar

  7. Small Engine Recoil Starter Replacement: paso 6, imagen 1 de 1

    • With this particular model there is a middle lock piece. Use a socket wrench to unscrew and release the coil.

    Editar

  8. Small Engine Recoil Starter Replacement: paso 7, imagen 1 de 1

    • Once unscrewed, remove the metal piece which releases the tension on the coil.

    Editar

  9. Small Engine Recoil Starter Replacement: paso 8, imagen 1 de 1

    • At this point add the new coil to the housing base. Snap the coil into position where the old on was.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 15

Ultimos 30 días: 37

Todo El Tiempo: 2,729