Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the plastic opening tool to remove the four rubber pads from the bottom of the device.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the four black 5mm screws using the PH1 screwdriver.
-
Gently pull and separate the two case covers.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the five silver screws on the motherboard using the PH1 screwdriver.
-
Gently slide and separate the motherboard from the base.
-