Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

The purpose of this guide is to show the steps necessary to remove the casing of the Slingbox and replace the motherboard.

Partes

No se especificaron partes.

  1. Use the plastic opening tool to remove the four rubber pads from the bottom of the device.
    • Use the plastic opening tool to remove the four rubber pads from the bottom of the device.

  2. The Slingbox has four black 5mm screws, one on each corner of the case. Remove the four black 5mm screws using the PH1 screwdriver. Gently pull and separate the two case covers.
    • The Slingbox has four black 5mm screws, one on each corner of the case.

    • Remove the four black 5mm screws using the PH1 screwdriver.

    • Gently pull and separate the two case covers.

  3. The motherboard has five silver 5.5mm screws connecting it to the base of the Slingbox. Remove the five silver screws on the motherboard using the PH1 screwdriver. Gently slide and separate the motherboard from the base.
    • The motherboard has five silver 5.5mm screws connecting it to the base of the Slingbox.

    • Remove the five silver screws on the motherboard using the PH1 screwdriver.

    • Gently slide and separate the motherboard from the base.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Nitin Muralidhar

Miembro Desde 18/07/16

222 Reputación

2 Guías creadas

Equipo

IUPUI, Team 2-2, Harley SU 2016 Miembro de IUPUI, Team 2-2, Harley SU 2016

IUPUI-HARLEY-SU16S2G2

5 Miembros

2 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 7

Todo El Tiempo: 423