Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
The purpose of this guide is to show the steps necessary to replace the faulty DC power connector.
Qué necesitas
-
-
Use the plastic opening tool to remove the four rubber pads from the bottom of the device.
-
-
-
-
Desolder all three lead prongs.
-
Gently pull the DC power connector from the motherboard.
-
Casi Terminas!
To reassemble your device, follow the instructions in reverse order.
Conclusión
To reassemble your device, follow the instructions in reverse order.