Saltar al contenido principal

Slingbox SOLO DC Power Connector Replacement

Qué necesitas

  1. Slingbox SOLO DC Power Connector Replacement, Motherboard: paso 1, imagen 1 de 1
    • Use the plastic opening tool to remove the four rubber pads from the bottom of the device.

  2. Slingbox SOLO DC Power Connector Replacement: paso 2, imagen 1 de 3 Slingbox SOLO DC Power Connector Replacement: paso 2, imagen 2 de 3 Slingbox SOLO DC Power Connector Replacement: paso 2, imagen 3 de 3
    • The Slingbox has four black 5mm screws, one on each corner of the case.

    • Remove the four black 5mm screws using the PH1 screwdriver.

    • Gently pull and separate the two case covers.

  3. Slingbox SOLO DC Power Connector Replacement: paso 3, imagen 1 de 3 Slingbox SOLO DC Power Connector Replacement: paso 3, imagen 2 de 3 Slingbox SOLO DC Power Connector Replacement: paso 3, imagen 3 de 3
    • The motherboard has five silver 5.5mm screws connecting it to the base of the Slingbox.

    • Remove the five silver screws on the motherboard using the PH1 screwdriver.

    • Gently slide and separate the motherboard from the base.

  4. Slingbox SOLO DC Power Connector Replacement, DC Power Connector: paso 4, imagen 1 de 1
    • Do not touch the heated tip of the soldering iron.

    • Check this guide out to learn how to use a soldering iron.

    • Desolder all three lead prongs.

    • Gently pull the DC power connector from the motherboard.

Conclusión

To reassemble your device, follow the instructions in reverse order.

Nitin Muralidhar

Miembro Desde 07/18/16

222 Reputación

2 Guías creadas

Equipo

IUPUI, Team 2-2, Harley SU 2016 Miembro de IUPUI, Team 2-2, Harley SU 2016

IUPUI-HARLEY-SU16S2G2

5 Miembros

2 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 276