Repara tus cosas Comunidad Tienda

Slingbox 500 Top Cover Replacement

Qué necesitas

  1. Slingbox 500 Top Cover Replacement, Top Cover: paso 1, imagen 1 de 1

    • Remove the sticker on the back of the Slingbox that covers the rear screws using a spudger.

    Traducir

  3. Slingbox 500 Top Cover Replacement: paso 2, imagen 1 de 2 Slingbox 500 Top Cover Replacement: paso 2, imagen 2 de 2

    • Remove the seven 7.9 mm rear screws from the device using a Phillips #1 screwdriver.

    • Flip your Slingbox so the bottom is facing upwards.

    • Remove the four 7.9 mm screws using a Phillips #1 screwdriver.

    • You may have rubber feet on the bottom of your Slingbox. If you do, just gently remove them with your hands and set them aside to put back on later.

    Traducir

  4. Slingbox 500 Top Cover Replacement: paso 3, imagen 1 de 3 Slingbox 500 Top Cover Replacement: paso 3, imagen 2 de 3 Slingbox 500 Top Cover Replacement: paso 3, imagen 3 de 3

    • Remove the upper section of the case by rotating your Slingbox to view the back and lifting up on the higher corner.

    • Use the opening tool to disconnect the small clips in the front.

    • These may require some minor force to disconnect.

    • Remove the entire top of the Slingbox and set it aside.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

David Sullivan

Miembro Desde 10/18/21

365 Reputación

3 Guías creadas

Insignias: 4

+1 mas insignia

Equipo

UMass Dartmouth, Team 1-3, Simcock Fall 2021 Miembro de UMass Dartmouth, Team 1-3, Simcock Fall 2021

UMASSD-SIMCOCK-F21S1G3

4 Miembros

3 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 7

Todo El Tiempo: 73