Saltar al contenido principal

Skullcandy UPROCK Earpiece Wiring Replacement

Qué necesitas

  1. Skullcandy UPROCK Earpiece Wiring Replacement, Earpiece Wiring: paso 1, imagen 1 de 1
    • Remove the cushion from the ear piece.

  2. Skullcandy UPROCK Earpiece Wiring Replacement: paso 2, imagen 1 de 2 Skullcandy UPROCK Earpiece Wiring Replacement: paso 2, imagen 2 de 2
    • Use a Phillips #0 to unscrew three 3.4MM screws from the earpiece.

  3. Skullcandy UPROCK Earpiece Wiring Replacement: paso 3, imagen 1 de 2 Skullcandy UPROCK Earpiece Wiring Replacement: paso 3, imagen 2 de 2
    • Find the wires connected to the speaker and check if they are intact.

  4. Skullcandy UPROCK Earpiece Wiring Replacement: paso 4, imagen 1 de 1
    • If a wire is broken, use a soldering iron to reattach it to the speaker.

    • To learn how to solder, read the Cómo soldar y desoldar conexiones Guide.

    • After soldering is complete, the wires should look like this.

Linea de Meta

2 personas más completaron esta guía.

Un comentario

my jack is broken can i get a whole new wire so i could do soldering or can i use any other wire. if i use any other wire can i connect in btw of old wire coz i removed the jack by cutting the wire from jack or do i have to do soldering from beginning form inside.

Anuj Verma - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 12

Todo El Tiempo: 6,187