Repara tus cosas Comunidad Tienda

Skateboard Pivot Cup Replacement

Introducción

When wear and tear settle in, pivot cups can produce an annoying squeaking sound, in addition to negatively affecting the performance of skateboard trucks. Replacing a damaged pivot cup is a relatively fast and simple process that can be accomplished anywhere if you have the correct tools.

This guide will demonstrate how to replace the pivot cups on your skateboard, and enjoy a squeak-free ride once again.

Qué necesitas

  1. Skateboard Pivot Cup Replacement, Pivot Cups: paso 1, imagen 1 de 2 Skateboard Pivot Cup Replacement, Pivot Cups: paso 1, imagen 2 de 2

    • Remove the nut from the kingpin.

    Editar

  2. Skateboard Pivot Cup Replacement: paso 2, imagen 1 de 3 Skateboard Pivot Cup Replacement: paso 2, imagen 2 de 3 Skateboard Pivot Cup Replacement: paso 2, imagen 3 de 3

    • Pull off the truck hanger and remove the bushings and washers.

    Editar

  4. Skateboard Pivot Cup Replacement: paso 3, imagen 1 de 1

    • Place your free hand a safe distance from the screwdriver in case it slips.

    • Wedge the screwdriver into the side of the pivot cup and raise the edge.

    Editar

  5. Skateboard Pivot Cup Replacement: paso 4, imagen 1 de 2 Skateboard Pivot Cup Replacement: paso 4, imagen 2 de 2

    • Grab the edge of the pivot cup with pliers and pull the pivot cup all the way out.

    Editar

  6. Skateboard Pivot Cup Replacement: paso 5, imagen 1 de 1

    • Insert your new pivot cup into the hole.

    Editar

  7. Skateboard Pivot Cup Replacement: paso 6, imagen 1 de 3 Skateboard Pivot Cup Replacement: paso 6, imagen 2 de 3 Skateboard Pivot Cup Replacement: paso 6, imagen 3 de 3

    • Put the parts of the truck back in place.

    Editar
Conclusión

Enjoy the smooth ride!

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 19

Ultimos 30 días: 56

Todo El Tiempo: 1,277